A 3D LUT can also be embedded in metadata of Blackmagic RAW files.

Automatic recording of camera settings and slate data such as project, scene number, take and special notes. Metadata SupportĪutomatically populated lens data from electronic EF lenses.

Iris wheel and touchscreen slider for manual iris adjustment on electronically controllable lenses, iris button for instant auto iris settings on compatible lenses. Built in ND FiltersĪuto focus available using compatible lenses. Maximum sensor frame rate dependent on resolution and codec selected. This is the perfect solution if your camera cannot be downgraded, if you want to run the latest firmware version with gyro data for stabilisation, or if you just want to use the original screen for changing setting, adjusting exposure and playback functionality while still running older firmware.Iris, focus and zoom on supported lenses. We have designed the 'BMPCC Screen Extension Kit' which converts the BMPCC connector to a standard ribbon cable (FFC) connector, allowing you to connect the screen quickly and easily without removing the top plate.

If your camera was originally flashed with an earlier version of firmware then it can be downgraded to version 6.9.6, which is the last firmware that allowed the camera to power up without the screen attached.Īttaching the screen using the original connector is very awkward due to the screen needing to be placed parralel to the main PCB which requires you to remove the top plate. There is no way of knowing whether it can be downgraded or not until you attempt to downgrade it. If the camera was originally flashed with 7.3 it cannot be downgraded and will only power up with the screen attached. Cameras manufactured after May 2021 come flashed with version 7.3 or later. Firmware plays a big part on how you use your naked BMPCC.

Blackmagic pocket cinema 6k